Alternator
model：QD-2
Applicable rod diameter (mm)：6-35
power：1.5*2kw
weight：1150kg
Principle：The automatic chamfering machine pulls the two ends of the distributor into the alignment roller table one by one, and the alignment roller table aligns the two ends to the chamfer end. The double end chamfering machine slides along the inclined track and enters the friction wheel of the main drive through the alignment positioning plate. The pressing device lifts to press the workpiece, starts the main drive shaft to rotate the workpiece, and sends it to the grinder to start the double chamfering
Application：Automatic feeding, automatic clamping, automatic tool advance and retreat, simultaneous processing of materials at both ends, ensuring material length accuracy, high speed and high efficiency
Automatic cutting machine
Cutting diameter: Φ8-45mm
Maximum cutting length: 120mm
Working frequency: 10-100 pieces/minute
Main motor power: 3kw
Cutting motor power: 10w
Application：Suitable for cutting round, triangular, square, flat, hexagonal, pipe and special-shaped materials
Baling Press For Waste
Principle: all kinds of metal scraps, steel scraps, scrap steel, scrap aluminum, scrap copper, etc. Extruded into rectangular, cylindrical, octagonal and other qualified furnace material
Use: strong applicability, compressible scrap aluminum, scrap copper, scrap iron sheet and other metal materials
Briquetting machine
Model: SBJ-360L
Equipment weight：6500kg
Power：30kw
Rated frequency：50 hz
Principle：It is mainly a mechanical equipment that uses hydraulic oil as the working medium to compress different raw materials through the transmission pressure of the hydraulic system
Application：Used for aluminum, iron, steel, shavings and other metal chips
Capacitance Compensation Cabinet
model：QD-2
Applicable rod diameter (mm)：6-35
power：1.5*2kw
weight：1150kg
Principle：The automatic chamfering machine pulls the two ends of the distributor into the alignment roller table one by one, and the alignment roller table aligns the two ends to the chamfer end. The double end chamfering machine slides along the inclined track and enters the friction wheel of the main drive through the alignment positioning plate. The pressing device lifts to press the workpiece, starts the main drive shaft to rotate the workpiece, and sends it to the grinder to start the double chamfering
Application：Automatic feeding, automatic clamping, automatic tool advance and retreat, simultaneous processing of materials at both ends, ensuring material length accuracy, high speed and high efficiency
CM0516-PLC Double head chamfering machine
model：CM0516
Applicable rod diameter (mm)：2000-4000
power：14kw
weight：1150kg
Principle：The automatic chamfering machine pulls the two ends of the distributor into the alignment roller table one by one, and the alignment roller table aligns the two ends to the chamfer end. The double end chamfering machine slides along the inclined track and enters the friction wheel of the main drive through the alignment positioning plate. The pressing device lifts to press the workpiece, starts the main drive shaft to rotate the workpiece, and sends it to the grinder to start the double chamfering
Application：This equipment uses a power turning head to cut the end face of the bar head chamferingor end fush for subsequent processing by automatic lathes or centerless grinders. lt is aprocessing tool for the material used in bars and automatic lathes to speed up production
efficiency.
CNC Lathe
Principle：The accuracy of tool path can be analyzed using the idle running energy of CNC machine tools. After inputting the digital program into the machine tool, install the fixture tool and workpiece
Application：Suitable for grinding and polishing flat surfaces, grooves, toothed parts, and various curved surfaces on lathes
Cooling System
model：QD-2
Applicable rod diameter (mm)：6-35
power：1.5*2kw
weight：1150kg
Principle：The automatic chamfering machine pulls the two ends of the distributor into the alignment roller table one by one, and the alignment roller table aligns the two ends to the chamfer end. The double end chamfering machine slides along the inclined track and enters the friction wheel of the main drive through the alignment positioning plate. The pressing device lifts to press the workpiece, starts the main drive shaft to rotate the workpiece, and sends it to the grinder to start the double chamfering
Application：Automatic feeding, automatic clamping, automatic tool advance and retreat, simultaneous processing of materials at both ends, ensuring material length accuracy, high speed and high efficiency
Copper Wire Crushing Machine
model：QD-2
Applicable rod diameter (mm)：6-35
power：1.5*2kw
weight：1150kg
Principle：The automatic chamfering machine pulls the two ends of the distributor into the alignment roller table one by one, and the alignment roller table aligns the two ends to the chamfer end. The double end chamfering machine slides along the inclined track and enters the friction wheel of the main drive through the alignment positioning plate. The pressing device lifts to press the workpiece, starts the main drive shaft to rotate the workpiece, and sends it to the grinder to start the double chamfering
Application：Automatic feeding, automatic clamping, automatic tool advance and retreat, simultaneous processing of materials at both ends, ensuring material length accuracy, high speed and high efficiency
Crystallizer
model：QD-2
Applicable rod diameter (mm)：6-35
power：1.5*2kw
weight：1150kg
Principle：The automatic chamfering machine pulls the two ends of the distributor into the alignment roller table one by one, and the alignment roller table aligns the two ends to the chamfer end. The double end chamfering machine slides along the inclined track and enters the friction wheel of the main drive through the alignment positioning plate. The pressing device lifts to press the workpiece, starts the main drive shaft to rotate the workpiece, and sends it to the grinder to start the double chamfering
Application：Automatic feeding, automatic clamping, automatic tool advance and retreat, simultaneous processing of materials at both ends, ensuring material length accuracy, high speed and high efficiency
FD-1 Segmenied machine
Model：FD-1
Hydraulic station：2.2kw
Size：3300*1600*1700mm
electric machinery：4kw
Principle：
Application：Suitable for cutting copper bars, copper tubes and other metal bars
FD-2 Segmented machine
Model：FD-2
Hydraulic station：2.2kw
Size：3300*1600*1700mm
electric machinery：4kw
Principle：
Application：Suitable for cutting copper bars, copper tubes and other metal bars